2019 Foremost DR24 Water Well Drilling Rig

2019 DR24 Foremost

2019 Kenworth T800

X15 Cummins

total miles 25,189

20,000 Front axle

46,000 rears.

4:56 Gear ratio

18 speed manual transmission

Standard 54” rear axle spacing.

254” WB

1800 Total Hours

Options Included with Drill Rig:

RC 110 Top Drive, Two Speed with 9,666 ft/lbs torque.

24" Standard Lower Drive - ( 83,335 ft/lbs torque )

Ingersoll-Rand 900/350 Compressor Pkg.

Auxiliary Winch with swinging jib, 6,000 lb capacity

Casing Jaws: 6", installed in lower drive

Breakout and holdback wrenches for 4 1/2" drill pipe.

2 GPM Cat Pump Water Injection System

line oiler for DTH hammer operation. (Graco- 10 gal)

Leveling Jacks - all four corners of drill deck.

Channel Iron shipping frame with lifting lugs

Sock style whip checks on all compressor air lines - double point anchors.

New style, hydraulic discharge swivel clamp. Fits both 10" & 16" Discharge swivels.

Sandline Winch - Braden PD12C c/w 1500 ft of 3/8 inch cable. Sheaved over hole center.

Upgrade to RC 150 - High Torque Top Drive (12,000 ft/lbs)

Upgrade Water Pump to Quad Bean E0413C - 18 gpm

Self-Retractable Fall Arrester, Mtd.top of Derek (above ladder)

Hoisting cable assembly - quick trip attachment

Tooling included with Drill.

Tooling Included - 6" & 10" Jaws

Hydraulic welder

3X4X13 Hydraulic Driven Mud pump

Lower Clamp

6 to 10" discharge swivel adapter, & wrenches

Machine specific owner's manual

6" and 12" tri cone

2 mud bits

6 inch DTH Hammer